Features and types of textured paint for walls

If you want to give the interiors of your home a unique style and character, and at the same time, you are in search of simple solutions, it is recommended to use structural (textured) paints for painting walls.

What to look for when buying this material? We will tell you about this in this article.

What is structural (textured) paint?

They are often called textured paints, as well as a substitute or alternative to structural plasters. This is because the effect of their application to the wall resembles this type of decorative structure. This is due to the use of special additives in the structure of structural paints, which increase the viscosity of paints and fillers, characterized by a high degree of granularity (different types of textured paints have different grains).

What might a wall painted with structural paint look like? It depends on how it was applied to the wall: we can create various patterns that repeat ourselves, for example, sand or pearls. We also note the fact that the textured paint has a low level of alignment, which is reflected in the simplicity of its use - we will not need any experience to create decorative textures that please the eye. Moreover, we can choose different shades, mix colors so that the wall can resemble concrete or wood.

Structural paint or plaster?

As already mentioned above, such a paint, after application to the wall, is very similar to structural plaster. Most often, it is chosen, first of all, because of a simpler application - the layer of the paintwork is usually thinner than the plaster, so we do not need to worry about applying it to the wall. The granularity of the plaster is also greater, which means that we will have to spend more material.

The only advantage of structural plaster is that it can be applied to an untreated wall without serious preparations. Before applying textured paint, the wall must be primed, and especially fill large voids with a special leveling compound. But even taking into account these additional factors, painting walls with textured paints and varnishes is a cheaper solution than coating it with plaster.

What is the best structural paint?

To answer this question should consider the varieties of this material. Textured paint products differ primarily from the composition and effect that we get after its application:

• Structural Acrylic Paint - It is distinguished primarily by its high vapor permeability. Due to this, it makes the wall "breathe", and also protects it from moisture. This type is resistant to abrasion and cleaning, so the effect on the walls will last longer
• Structural Latex Paint - similar to the acrylic version, also differs in satisfactory vapor permeability and protection against moisture. In addition, this material is durable and resistant to abrasion and scratching. It should also be noted that this paint is "economical." This means that we don’t need to buy it too much to paint the wall,
• Polyacetene Vinyl Latex Structural Paint - it is not resistant to water, also has low vapor permeability, therefore it should not be used where there is high humidity and temperature changes. The advantage of this type of paint is that it is the most durable.

Note that structural paint is sold in stores in four forms. The first is a dense mass that is immediately ready for use. In addition, textured products are also available in the form of paste and powder - therefore, they are not traditional in the sense of the word. They are added to standard acrylic paint, which acquires properties typical of textured paints.

However, this is not all. We can also purchase a hybrid product. What does it mean? The kit contains both powder and paste. After combining these components, we get a finished composition for painting walls. This is a very good solution, because it allows you to use various combinations, adjusting the ratio of paste and powder. Thanks to this, we can achieve various effects, patterns and textures on the walls, which can be adjusted in accordance with the desired effect.

Textured paints and varnishes also differ in the effects that are obtained after their use:

• Sand paint - allows you to make patterns on the wall, similar to grains of sand,
• Grain paint - allows you to make the texture of the wall a little rougher, containing many grains. Thanks to this, you can effectively hide the irregularities of the walls,
• Decorative structural paint - allows you to make art patterns on the walls,
• Deccopearl structural paint - Also called 3D paint and has a characteristic volumetric effect on the walls.

Of course, in addition to the effects obtained, we should choose a shade of paint. There are a lot of them in stores today, so everyone can find something for themselves. It is also worth noting that we can separately purchase structural paint for the ceiling and wall, as well as for exterior and interior types. External textured paint is characterized by increased density and granularity. Thanks to this, we can get a special, decorative facade of the building.

How to apply structural paint on the wall?

This type of paintwork is versatile enough. You can apply textured paint on various types of surfaces:

This type of paintwork is characterized by high durability, resistance to abrasion and the ability to cover numerous bumps on the walls. Add to this the ability to create many different structures.

The procedure for applying structural paint is as follows:

1. First you need to prepare the wall for painting. The surface should be cleaned and degreased. We can use water with detergent added. If there is a lot of dirt or it has been eaten up, you can use ammonia to clean the surface (do not forget to wash it thoroughly later)
2. When the wall dries, apply a primer (it must be adapted to the type of structural paint). If you notice large cavities on the wall, fill them with plaster. Protruding layers of plaster or paint should also be removed. Do not worry about bumps - if they are large, just select a paint with a very visible pattern,
3. Before you start painting the walls, you should make sure that we have the right tool. We need: a bucket, a drill, a float, a large bristle roller or a brush and a roller for texture. Then we can proceed to mixing the paint in accordance with the manufacturer’s instructions and applying to the walls,
4. Structural paint should be applied in one long stroke - only then will it lie down evenly. Therefore, if a particular fragment of the wall is large, it should be divided into equal parts. Usually two layers are enough to cover the wall. Do not forget to mix paint from time to time so that it does not lose its properties,
5. If you want to create a specific pattern or texture on the wall surface, you can use the so-called invoicing roller. It does not need to be dipped in paint - just go through it only on the wall. You can create original patterns and ornament on the walls with the help of special brushes, sponges or various patterns. The applied paint hardens after about 10 hours (after this time it is already possible to apply the varnish), and after two days it will completely dry.

Structural paint. Is it worth the money?

In the case of structural paints, quite often builders have doubts about their use. Therefore, it is worth answering the most frequently asked questions.

Will structural paint cover bumps? Textured paint is ideal for covering any wall irregularities. If they are large, use a product with a more noticeable pattern. In the case of cavities in the wall, they must be filled with a plaster composition.

Is it possible to wash structural paint? Yes, it can be washed, so we can safely paint it with halls, corridors or other rooms where dirt often gets on the walls.

Is structural paint suitable for the kitchen? Yes, but do not forget to use vapor-permeable products (acrylic and latex paints).

Is structural paint suitable for the bathroom? Yes, however, moisture resistant paints (acrylic and latex paints) should be used.

What is the price of structural paint? Perhaps the main drawback of these materials is their high cost. You can buy structural paint today at a price of 1,000 to 3,500 rubles per pack.

Main characteristics

Decorative textured paint has the main distinguishing feature, which concerns the composition and appearance. Relief paint resembles a translucent substance, which has considerable strength. The base used is acrylic, but secondary additives can be completely different.

Due to its resistance to various external factors, the product is used for external and internal work. To give a substance a specific color, you must add color to it. The choice is represented by several hundred colors and shades.

How to apply textured paint, it becomes clear even to an amateur, the instructions indicate all stages of working with the product to the smallest detail. The mixture is applied using a grooved roller, spatula or spray gun. You can also make textured paint with your own hands. The putty is mixed in a certain proportion together with the paint for wallpaper. Sometimes a foreign filler is added: crumbs or small gravel.

It is very difficult to predict what properties a self-made product will have, so it’s better to purchase finished goods.

Types of texture paint

Textured paints during painting manifest themselves in completely different ways. Many immediately wonder: how to paint so that the color is more expressive or there is no glossy shine? Much depends not only on the method of application and the quality of the product itself, but also on the type.

Varieties are represented by the following product categories:

• Misuri - is a product whose base contains modified starch of acrylic origin. Do it yourself with a smooth and textured surface.

• Marseille wax is a practical base that is suitable for any type of room. It is used for walls as a protective coating against moisture and similar fumes. This base is covered with wax again.

• Paint with quartz chips - a composition of aluminum particles, other natural fillers are also included here. Thanks to this, a variety of textures are created, which are easily formed with a smooth spatula.

• Atacama - quartz sand, which is responsible for the relief of the surface, is the basis of this species. This also includes a metal component, which guarantees the appearance of a reflective effect. In general, the wall seems velvet.

You can expand the range of effects by coating the paint with varnish. Pastes with various additions are added to it. Due to this, the color and light perception of the surface changes depending on the change in the viewing angle, daylight, and additional illumination.

On the video: how to make a texture roller.

What it is?

Textured paint is a thick viscous mass of high density based on acrylic and polymer components. The composition is often added with substances that, when applied, seem to scratch the layer and form a beautiful relief surface. It can be quartz sand, granite or marble chips of the finest grain size, crushed gas silicate, polymer fibers. To give greater density to the textured paint, modified starch is added.

Various types of textured paints are used for exterior and interior use, for facade cladding, wall and ceiling finishes. In fact, This finishing material combines two functions at once - paint and decorative putty. Therefore, repair is reduced by at least half. Most brands have ingredients that allow them to dry quickly in a thick layer 1-2 hours after application, so you won’t have to wait long.

In addition, high-quality textured paints have the following advantages:

• do not contain acetone and other solvents, so during the work there is no persistent pungent odor,
• created on the basis of harmless components, safe, do not corrode the skin upon contact with hands,
• sufficiently resistant to damage and durable,
• when applied, fill small cracks and crevices, leveling the surface,
• resistant to moisture, temperature extremes, the effects of fungus and bacteria,
• vapor permeable, therefore, after the repair, air circulation will occur in the room,
• These materials are fireproof.

Before deciding to finish the walls in the room with textured paint, it is worth remembering some of its disadvantages:

• thick layers require a large consumption of material,
• if you want to repaint the wall section, then the old layer must be removed.

Despite these disadvantages, such paint is very practical and very popular in modern repairs. Its main advantage for beginners is the ease of application. The process is clear and easy, without the need for complex construction tools. Many are satisfied with the advantage that the walls do not need to be putty before painting.

What is the difference?

By its consistency, the textured paint is much thicker than the usual types used for exterior and interior decoration: enamel, oil, acrylic. Therefore, when working with it, you will have to use several other tools and methods of application. The structural component is also different: if for traditional types of paints the main task is to make the wall smooth, then with the help of textured, on the contrary, they achieve a relief surface.

The composition of textured paints, unlike other types, may include fine-grained insoluble elements, which when applied give waves, roughness or other volumetric effect. The components of these brands are extremely diverse - from natural sand to complex polymers.

Unlike other types of coloring materials, textured paint does not require leveling the surface with the base and finish putty before application. Perfectly straight walls brought out “to zero” are not needed, and this also simplifies the work.

For applying various types of textured paint, not only a roller or brush is required; other tools may be needed.

Types and characteristics

For interior wall decoration, several dozen types of textured paint are used. They differ in ingredients, purpose, shades and type of texture.

First, consider the most common textures for these materials:

• Mizuri - It is made on the basis of modified starch and acrylic fillers. Using it, you can create smooth or textured surfaces with smooth curved waves. Thanks to pigments, various shades can be obtained; when dried, the surface has a characteristic glossy shine. A distinctive feature of this paint is that it is applied mainly by hand.

• “Marseille wax” - paint based on artificial wax fillers. After drying, it looks like aged stone with dark and light areas, the surface becomes shiny. This variety is good protection against moisture and fumes. It is used for various rooms, the effect of stone can add sophistication and nobleness to the interior.
• Decorative paint Wet silk contains cellulose or cotton fibers and dyeing polymer pigments, giving different shades. The painted surface will not have such a voluminous relief as Mizuri, but its appearance will turn out to be very impressive. Various brands of “wet silk” with the effect of velvet or velor will bring a chic atmosphere to the interior, under the influence of light, the patterns will shimmer like silk threads and change their shade from different angles.

• Grade of textured paint Atacama contains quartz sand, which gives the effect of a rough surface. Special fillers give a cold metallic luster, the feeling is that the wall is covered with an old mirror or steel sheet, the look is very original and spectacular.
• Texture "shagreen" imitates the unevenness of the coating on concrete, metal or plaster. In appearance, it resembles an orange peel or sandpaper. Depending on the components, “craters” on the surface can be a width from hundredths to a few millimeters.

• Type of texture "relief" with solid particles can have a variety of effects: cracking, smudges, waves, bark beetles and others. To create the desired texture for the paint, use certain application methods. "Relief" can be monophonic or have several shades.
• Silk plaster or liquid wallpaper - This is a material for interior decoration. The composition contains cellulose fibers and polymers that give a special velvet effect on the wall. Mostly light shades are used.

Paints with a texture can also be used for exterior works: for the facade of a building and small architectural forms. They must be waterproof and frost-resistant. To do this, you should look at the packaging in advance, water dispersion and facade brands are suitable. In addition, there are universal types suitable for both outdoor and indoor use.

Depending on the base, textured paints can be as follows:

• Acrylic types possess high plasticity, are made on a water basis without solvents. Their dignity is harmlessness, the absence of odors, the ability to use both at home and on the street. The disadvantages include poor protection from sunlight.
• Vinyl paints possessing protection against external influences, are widely applied for front works. Due to the high plasticity, it is difficult to obtain a volumetric texture from them. Grasp well with any surface.

• Silicate species contain liquid glass, which, when dried, forms a protective film. Therefore, they are widely used in outdoor decoration. Of the shortcomings, it is worth noting the high consumption.
• Silicone paints apply for external and internal works. Very plastic and struts.
• Mineral textured paints based on cement, moisture resistant and vapor permeable, but sensitive to temperature extremes. Therefore, for outdoor use, they are not recommended.

Any kind of the described varieties for interior or exterior decoration has many options for textures and a diverse palette, the choice depends only on the tastes of the owner.

Varieties of textured paint for interior decoration

The main criterion for choosing textured paint is its basis, in connection with this, finishing materials for internal work are classified into the following varieties.

Characteristics of textured paint for outdoor use

Textured paints are often used for finishing external surfaces; when choosing, you should pay attention to the manufacturer's recommendations on the package. They must possess:

• water resistant
• resistance to temperature differences.

Since the texture layer is thicker, it will take longer to dry, so you need to choose textures that include special additives that accelerate these processes.

All the pros and cons of textured wall paints

Textured paint is very popular, and there are a number of explanations for this:

• long service life without loss of initial characteristics. With proper care, it will last at least 10 years,
• if necessary, you can update the coating, while the old does not need to be removed,
• hypoallergenic and environmental friendly,
• you can create a monolithic surface,
• easy care, wet cleaning of the washable surface is allowed,
• versatility - suitable for both living rooms and kitchens.

Before choosing a texture, you should familiarize yourself with some of the disadvantages:

• the invoice consumption is 1,000 g / m²; when applying several layers, the cost of coating will be high. It’s necessary to calculate the painting budget in advance,
• to obtain a high-quality result, alignment of the base is required,
• To create an unusual effect, you need certain skills in applying plaster.

Textured paint for interior decoration: features of use

To decorate the interior of living rooms, you can use any textured paint intended for interior decoration. Most often, preference is given to acrylic and silicone compounds. However, the use of mineral compounds is also possible.

When decorating, not only the entire wall or ceiling can be formed, but also individual zones. With the help of these compositions are made columns, pilasters or beams. We offer you to see interesting solutions that were used in the design of various rooms:

Textured exterior paint

For facade decoration, manufacturers offer a wide range of products. When choosing a suitable option for outdoor work, you should pay attention to the compositions, the basis of which is:

• vinyl. A plastic or vinyl filler acts as a binder. Such material is relevant only when performing outdoor work. The formed coating exhibits low permeability, but at the same time has high adhesion. It can be applied to any substrates, protecting them from negative external influences. The composition is complicated in work,
• acrylic. Great color scheme. Easy to apply. The ability to form intricate reliefs. UV Coating
• silicone. Modern textured paint is used to form a long-lasting vapor-permeable coating, which allows protecting the substrate from moisture and other negative factors. Helps mask defects
• polymers or silicates. Water glass is the main component used in the formation of the paintwork on the facade. With high vapor permeability, it demonstrates good adhesion to the base. Repels pollution, protects from external factors,
• mineral components. The basis is cement. Due to the low resistance to temperature fluctuations after winter, cracks may appear on the surface, which limits the use in the design of facades.

Add fillers yourself

The specificity of the mixtures not only allows, but also implies experiments with the composition. By adding certain ingredients, you can adjust the structure of the relief and its density, change the tactile sensations from the finished surface, or functionally adapt to a particular room.

Hand-made textured paint provides full scope for creativity. Possible additives:

• sand,
• stone chips
• fabric fibers
• reflective elements, broken glass,
• seashells,
• filings and much more.

Using special additives it is possible to achieve effects in which the coating will look like fabric, cork, silk or metal. And from the photo the textured paint will be generally unrecognizable.

However, you need to understand that if you go too far with additives, this will give the desired appearance, but not for the better, affect the quality and durability of the result.

Ways to manually give relief

In the matter of obtaining a unique pattern, an alternative or addition is the method of applying textured paint to the surface. Using ordinary tools and improvised tools without special artistic abilities, you can get results that, with a clear conscience, will be called works of art.

A simple spatula allows you to simulate a rocky surface, it is enough to adapt with clear, quick movements to cover the wall with cross layers. For most people who know the basics of repair, this effect is obtained by itself, without intent.

But the sponges and rollers are designed to get a more informed and solid, but uncomplicated "ragged" coating, which can often be seen on the facades of old Soviet buildings of the Stalin era.

And do not be embarrassed by the flakiness of such structures, they have already outlived their own, moreover, the use of modern silicate solutions will allow avoiding such a fate.

The original texture will provide a simple rough fabric, although in this case it will be necessary to correctly select the color scheme, otherwise the idea will be noticeable only upon closer examination.

Will be useful for lovers of creativity and brushes with hard bristles, wrinkled paper, as well as ropes that can be wound on a roller and see on the wall a kind of bamboo thicket.

Stand alone is the use of stencils and household items. Or even your own hands and feet. For example, textured paint on the ceiling, designed in this way is unlikely to leave anyone indifferent.

Manufacturers Overview

Manufacturer Amourcolor produces high-quality textured paints that are resistant to wear. Customers are provided with 3 product options: Tactite with suede or mosaic, Perlata with pearls and Escenta with a variety of halftones. All paints are water-based, environmentally friendly.

Domestic manufacturer Lacra offers paints with various textures: embossed, "Misuri", "wet silk" and others. All products with high quality can be purchased at a bargain price.

Russian company Vgt manufactures paints and varnishes since 1992. It is possible to purchase various types of paints with a texture: facade and interior, water-based, crack resistant.

Products are perfect for our climate. There are a lot of positive reviews on it. In the video below you can watch a master class from the manufacturer "VGT" on applying textured paint with the effect of "Travertine".

Manufacturer from France Blancolor supplies many types of resistant materials for decorative wall decoration. Among them are translucent paint Essuyables, silk based on cellulose fibers Tradimurs, with the effect of waxed plaster Effets Platre Cires and many other types.

Paints with texture from the manufacturer Clavel have a variety of colors, perfectly imitate silk, brocade, velvet on the walls. There are various types of design - from antique to modern. The composition uses environmentally friendly components.

What to consider when choosing?

It will be good to choose a textured paint for velvet or silk in the bedroom, living room or hall, the choice depends on the rest of the interior details and the preferences of the owners. For the ceiling of the living room in the apartment, it is worth using not too prominent views, preferably light colors.

In rooms with high humidity, it is worthwhile to select waterproof or water dispersion paint for the bathroom. In the kitchen, where there is a high probability of contamination, the washable variety of such coatings will be relevant.

For facade work, you must buy the appropriate brands with resistance to adverse weather conditions. Acrylic fading in the sun should not be used, but vinyl grades are better.

Features of the choice of washable textured paint for the walls of the kitchen, corridor and bathroom

For bathrooms, you should choose coatings with high moisture resistance. In the kitchen and in the corridor, the likelihood of pollution is high, so the main criterion is the possibility of wet cleaning. Having studied all the compositions, we can say that preference should be given to acrylic paint - it has excellent characteristics and a rich palette of shades. Using interesting application techniques, you can achieve a unique visual effect.

What textured paint is suitable for living rooms

Silicate textured paint is suitable for living room ceilings, provided that the surface is pre-well leveled. The coating has a translucent structure and emphasizes all defects. It should be applied in an even layer without additional relief, it is advisable to choose light shades. And for walls, you can choose a texture with an unusual effect, for example, velvet or wet silk

Textured exterior paint

For exterior decoration of buildings, you should choose a textured paint, which includes special additives that increase the resistance of the coating to temperature extremes, ultraviolet radiation and high humidity. Acrylic compositions burn out in the sun, so it is better to refuse them, but vinyl mixtures are just suitable for painting facades. In addition, silicone and silicate textures can be used.

Textured wall paints with unusual effects

In addition to the standard coating, textured wall paints make it possible to form a layer with various effects. Effectively look compositions with the effect of mother of pearl or silk. This type is relevant for small rooms that you want to fill with light. Silk plaster is predominantly light colors. The direction of the light flux changes the hue of these coatings, due to which they are sometimes called “chameleons”.

Attention! Externally, the coating looks like a stretched silk canvas with a characteristic pearl shine created by pigment additives.

“Wet silk” looks no less impressive, including cotton or cellulose fibers with polymer pigments of various colors. Such decor will help create a special atmosphere in the room. In the rays of light, the pattern shimmers, changing the shade.

Granite dye also looks spectacular, which got its name for a realistic imitation of texture, and not the presence of granite chips in the composition. For the formation, paint of various shades is applied, applied to the surface using a spray gun.

Key Benefits

Textured wall paint has a lot of positive factors. The main feature is the combination of many functions that are aimed at maintaining the quality of the wall surface and the paint itself. Due to its positive properties, textured paint is used more often than any other finishing material.

The advantages of this type of finishing material:

• It can be used indoors of any functional accessory (residential, warehouse). This feature is possible due to the frost resistance of the components of the finishing material.
• The base of the substance is resistant to direct ultraviolet rays, which means that the color gamut practically does not change during operation.
• The elasticity of the material allows you to use it even in new buildings. Strong substance does not deform during the shrinkage of the building.
• The antifungal base makes the paint immune to moisture. Moisture resistance allows the use of this finishing material in the kitchen, bathroom and rooms of similar functionality.
• Does not absorb or transmit odors that may form over time in the building.
• Thanks to the viscous component, the paint practically does not accumulate dust and is not contaminated. If the need for wet cleaning does arise, then chemicals and water will not damage the quality of the color, and the texture will remain intact.
• For production, only environmentally friendly components are used, allowing the use of paint for surface finishing in a children's room or bedrooms, hallways or living rooms.
• You can apply textured paint on any surface: brickwork, wooden base, plaster, tile base.
• A wide selection of colors and textures that easily reflect the main trends of any interior design.

In this finishing material hypoallergenic properties are appreciated. This allows you to use it in any case and for any diseases of the respiratory system. The paint remarkably hides the imperfections and defects of the surfaces to be worn.

Finishing work with paint

Textured wall painting is quick and easy. In this case, no special technologies are used in the process of painting and surface treatment. Relief painting of the walls is carried out in several stages:

1. Wall decoration with paint begins with the preparation of the mixture itself, or rather, giving it color. The procedure is done with your own hands using a color scheme.

Color selection

2. Suitable tools are selected and the workplace is being prepared. Do not do without surface preparation. For interior decoration, the wall should be as flat as possible.

Wall surface preparation

3. Work with textured paint does not require special devices and appliances. First, the base is applied using a conventional spatula. So, the substance is evenly distributed over the entire surface of the wall. Any spatula can be used: metal, rubber or wood. It depends on the skill of the one who “putty” the wall.

Applying paint to the wall

The most important step is the decoration of the walls with textured paint, namely, the main pattern or texture is specified. The following methods of applying textured paint are distinguished:

• Special granules are used that interfere with the base and form a pattern.
• The pattern is defined by a special roller that defines the pattern.

Lastly, re-coating is carried out with varnish, enamel, wax. It can be carried out in two days, since only after 48 hours the paint completely dries.

An additional layer is simply necessary, since the finished surfaces with paint alone can be susceptible to certain types of exposure.

Secrets of Use

In addition to the correct application of the mixture to the surface, additional nuances must be taken into account during the execution of work. There are few of them, but they can affect the whole process in the field of repair work in this room:

• Some types of texture paints cannot be mounted at low or too high temperatures.
• Humidity in the room should not exceed the norm or vice versa be too high.
• The paint layer should not exceed more than 1.5 cm in one layer.
• The surface must be as flat as possible, without the presence of sudden changes, the minimum degree of roughness.
• The finished mixture is used for a period of a certain period. If it has expired, then the quality of the work and further operation is at great risk.
• It is better to use secondary coatings such as acrylic, wax, varnish. This will preserve the integrity, enhance the effects, balance the color.

It is important to pay attention to the instructions, which clearly indicates all the features of the use of finishing material of this type. Particular attention should be paid to the conditions in which only high-quality finish should be made.

Color palette

Relief views and Mizuri have a wide range of basic shades - from white to maroon. “Marseille wax” can be beige, brown, wood-like. The texture of the surface treated with Atacama paint can have a noble metallic sheen of gold or silver. Textures "shagreen leather" are silver black or light. Wet silk paint has a rich palette of colors: green, burgundy, navy blue, brown and others.

Subtleties of application

Doing it yourself with your own hands using this material is not difficult. This work can be done even by beginners in the construction business. The wall, which must be covered with textured paint, does not need an ideal finishing putty, but large bumps and cracks will have to be eliminated. To do this, you can use a cement mortar or epoxy putty. After that, the surface is cleaned of dust and primed with an acrylic primer of deep penetration.

Work best with rubber or rubber gloves. Despite the fact that most textured paints do not have a harmful effect on the skin, protecting your hands will not be out of place. Before painting, it is necessary to protect the floors and furniture from pollution, for example, to cover them with plastic wrap.

Interior interior paint is applied to the walls in several ways.

A terry roller with a thick pile is the most common tool for ordinary paints, it is also convenient for applying textured, not too thick compositions.

For the convenience of work, so as not to build a stepladder, you can put it on a long fishing rod, which is sold in hardware stores. It is enough for the height of a standard city apartment.

A thicker consistency can be applied with a spatula. Concentric relief patterns or waves can be created with a tool with a width of 10 -15 cm. For smoother surfaces, you can use spatulas 30 - 40 cm. In this case, movements are best done asymmetrically.

Especially for this type of work, there are rubber comb-spatulas with small cloves. After they draw a fancy pattern through a layer of paint. For the beauty of the decoration, the movement should be long and uneven.

Many types of textured paint are applied by hand. The advantages of this method are that you don’t need any tools, and with the help of your hands and fingers you can create any pattern, it all depends on your own imagination.

To create fancy textures with textured paint, you can use any improvised items, the imagination is limitless. Some make patterns with a broom or brush. In addition, you can create a stencil and paint with it.

A very unusual version of textured paint in the form of a spray in spray cans. Due to the special composition of the substance, the jet directed to the wall forms a three-dimensional pattern. There are many texture options: stone, wood, granite chips, marble. Such a product costs a lot, but its consumption is small, it’s easy to work, and the effect is amazing. Among the manufacturers of textured paints in cans are: Rust Oleum, ABRO, American Accents.